top of page

Gairdean is our take on the ubiquitous Land Rover Cubby Box. Made from 12mm Black Hexa Birch Ply it's way more robust than the usual MDF / chipboard ones you see with a great design aesthetic. Plus no stick on vinyl. 

 

We've included three drinks holders suitable for a range of cups/mugs/cans. They're based on the Yeti 20oz Rambler cup and Yeti 8oz Rambler cup (see Tech Spec below for dimensions) but other cups / mugs / cans will fit. 

 

Bungee tie downs to the front and rear - just because we know what's like to try and store things in a Land Rover...quick and simple is best!

 

For that added splash of luxury you can add an arm rest pad. These are available in:

- Black & White Herringbone Harris Tweed

- Orange Harris Tweed

- Machair Green Harris Tweed

- Atlantic Blue Harris Tweed (New)

 

For the Gairdean Cubby Box cushion for Land Rovers, we offer:

3-inch Gairdean Land Rover Defender Cubby Box Cushion –  Providing extra padding and comfort. 

 

The heater locker can be found (Mud Defender Diesel Heater Box)

 

There's also a bungee loop which adds another hold down option on top of the armrest 

 

Need to add some switches? No problem, just drill through and fit. 

 

Gairdean will arrive assembled ready for you to drill through and mount in place.

Gairdean Land Rover Defender Cubby Box

PriceFrom £120.00
Gairdean Pad
Colour / Finish
Quantity
  • Made from 12mm black hexa or natural birch ply

     

    Standard

    External dimensions:

    300mm (w) x 430mm (d) x 315mm (h) 

    Internal dimensions:

    276mm (w) x 235mm (d) x 250mm (h) 

    Bungee:

    6mm black bungee

    Cup holder Diameter

    Standard - 78mm and 68mm

     

    Low Profile

    External dimensions:

    Dimentions to Follow…

    Internal dimensions:

    Dimentions to Follow… 

    Cup holder Diameter

    Low Profile - 78mm

     

    Cushion sizing

    350mm (w) x 290mm (d) x 75mm (h) 

    Firm, marine grade upholstery foam with breathable material to back and zip off cover. Attachment by velcro (provided)

     

    Install / Fixing

    Can be screwed or through bolted (fixings not included).  The holes in the baseplate are for a standard seat base cover plate for LT85 and R380 models (where the standard cover plate has riv nuts fitted), the LT77 and other models you can use these holes to screw straight into the cover plate with tek screws and washers. 

Related Products

bottom of page